title.jpg

  t1.gif (102 bytes)

山新首页 Homepage

t6.gif (140 bytes)

企业简介 Introduction t3.gif (1013 bytes) 产品介绍 Products

t4.gif (249 bytes)

网上订购 Cantucts us
产品介绍 Products
特点 Features
规格 Specifications
参数 Parameters
使用 User's  Guide
维护与运输
Maintenance and transportation
 
   使用:

1、  切脚刀必须安装在有安全防护装置的切脚机上工作。
2、 
刀片安装调试时,以内孔为基准,以80mm 端盖压紧在切脚机主轴上,用力均匀、适量,严禁敲打。
3、  刀片经6000/分试验,使用速度应低于4500/分。
4、  线路板推进速度应均匀、适量,避免冲击。
5、 刀片的使用初期,会出现细锯形缺口,不影响工作。

    User’s Guide:

1. Cutting blade must be mounted on the lead cutter with safe protection unit.
2.
During intallation , using inner bore as benchmark , blade must be fastened on the principal axis of pin cutter with an 80mm diameter end closure . Installation force should be gentle and well-proportioned . Any beat is forbidden .
3.
Blade has passed 6000rpm test , its operation speed should below 4500rpm .
4.
PCB feed-in speed should be uniform and well-proportioned . Avoid any impact .
5. During initial stage , blade will appear small sawtooth-like gap . But it has no infulence on operation .